Breaking; When Taking A Break - Atlas Copco TEX Serie Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Breaking

♦ Let the machine do the work; do not press too
hard.
♦ Avoid working in extremely hard materials for
example granite and reinforcing iron (re-bar) which
would cause substantial vibrations.
♦ Any form of idling, operating without insertion tool
or operating with an uplifted machine must be
avoided.
♦ When the machine is lifted, the start and stop
device must not be activated.
♦ Check regularly that the machine is well lubricated.

When taking a break

♦ During all breaks you must place the machine in
such a way that there is no risk for it to be
unintentionally started. Make sure to place the
machine on the ground, so that it can not fall.
♦ In the event of a longer break or when leaving the
workplace: Switch off the power supply and then
bleed the machine by activating the start and stop
device.
18 © 2015 Construction Tools PC AB | No. 9800 1386 90c | 2015-10-07
TEX 09PS, 10PS, 12PS
Original instructions