Control Applications Using A Different Remote Control; (Remote Control Unit, Voice Keypad, Etc.) - hager S761-22 Manual De Instrucciones

Introduction
Control applications using
a different remote control
(remote control unit,
voice keypad, etc.)
• ON/OFF: for controlling lighting or a 230 V electrical
device using your remote keypad or remote control.
Each time you press on the keypad or remote control
you activate or deactivate the device or lighting (no
duration limit).
Activating
an electrical device
Press on a key
programmed for:
• Light ON
• Light toggle switch
• Relay ON 1, 2, 3 or 4
• Toggle switch relay 1, 2, 3 or 4
The appliance can also be activated or
deactivated using the remote-controlled
G
socket programming key.
B
This application is always active and can be used
together with other applications.
Press and hold the key until the device responds.
Deactivating
an electrical device
Press on a key
programmed for:
• Light OFF
• Light toggle switch
• Relay OFF 1, 2, 3 or 4
• Toggle switch relay 1, 2, 3 or 4
• Timer: control lighting or a 230 V device using your
remote keypad or remote control. The device or lighting
will be automatically switched off after the programmed
duration.
Starting
the timer
the timer again
Press again
Press on a key
on a key
programmed for:
programmed for:
• Light timer
• Light timer
• Timer relay 1
• Timer relay 1
• Timer relay 2
• Timer relay 2
• Timer relay 3
• Timer relay 3
• Timer relay 4
• Timer relay 4
The appliance can also be deactivated
using the remote-controlled socket pro-
gramming key.
This application can be used together with the
ON/OFF and Presence Simulation applications.
The timer duration is factory-programmed for 3
minutes. This duration can be changed (see chap-
ter on "Operating options").
92
Starting
Stopping
the timer
Press on a key
programmed for:
• Light OFF
• Relay OFF 1, 2, 3
or 4
• Light toggle switch
• Toggle switch relay
1, 2, 3 or 4