Grease Nipples; Tensioning Belt On Travel Drive - TYROLIT Hydrostress FSD930 Serie Manual De Instrucciones

7 Maintenance

7.1 Grease nipples

7.2 Tensioning belt on travel drive

Floor Saw FSD930
When?
Daily
Weekly
Every 50 hours of operation
Annually or every 100 operating hours
According to the information from the motor
manufacturer
Position of grease nipples
1 Motor: 1 item
2 Feed adjuster control rods: 4 items
3 Wheel drive shaft bearing: 2 items
► Remove the appropriate number of belt links until the belt is tensioned.
TYROLIT Hydrostress AG
What?
► Check oil level.
► Perform a visual check for damage.
► Check belt and chain tension and adjust as
necessary.
► Lubricate grease nipples.
► Arrange a major service by TYROLIT
Hydrostress AG or an authorised
representative.
► Carry out all necessary measures in
accordance with the operating instructions of
the motor manufacturer.
4 Cylinder eye: 1 item
5 Blade drive shaft: 2 items
Page 19