Switch On Motor - TYROLIT Hydrostress FSD930 Serie Manual De Instrucciones

6.7 Switch on motor

Floor Saw FSD930
Symbol
Coupling lever (6) is in the uncoupled position
EMERGENCY STOP switch (5) has been released
1. Turn ignition key (2) to the preheat position in order to preheat the motor.
2. Turn ignition key further to the right in order to start.
Battery and oil pressure displays (1, 3) light during starting and then go out.
3. Set motor speed with speed governor (4).
Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
TYROLIT Hydrostress AG
Page 15