Power Switch - Vertex Standard VX-1210 Manual De Instrucciones

Front Panel Controls and Switches

POWER Switch

Turn this knob clockwise to turn the radio on. Counterclockwise rotation will turn
the radio off.
SEL Knob
This 12-position detented rotary switch selects the memory channels, and tune the
operating frequency, if your transceiver is configured for use of the VFO feature.
VOL Knob
This control adjusts the audio volume level. Clockwise rotation increases the vol-
ume level.
CLAR ("Clarifier") Knob
This control allows you to offset the receiving frequency by up to 200 Hz in 10 Hz
steps (SSB, CW, and DATA modes), or up to 400 Hz in 20 Hz steps (AM mode).
This control is helpful in case the incoming signal is drifting.
GND Terminal
If an earth ground connection is available at the operating site, this terminal may be
connected to it to provide improved performance and safety.
ANT Jack
This jack accepts a 50
is enabled, the optional YHA-61 whip antenna (or FHA-27 folding whip antenna
with GN-1210 goose neck) can be connected to this jack directly. Use only a type
PL-259 (type M) plug.
2
SEL VOL
antenna. If the optional ATU-1210 internal antenna tuner
VX-1210 O
PERATING
M
ANUAL