Vertex Standard VX-1210 Manual De Instrucciones página 11

Operation
1. Turn the transceiver on by rotating the POWER
switch clockwise.
2. Rotate the SEL knob to select the desired Memory
Channel.
3. Rotate the VOL knob to set a comfortable vol-
ume level.
4. To transmit, press and hold in the microphone's
PTT switch, and speak into the microphone in a
normal voice level. To return to the receive mode,
release the PTT switch.
5. If the frequency of the station you are receiving
should start to drift, rotate the CLAR knob to fol-
low the drifting signal; this does not cause your
radio's transmitting frequency to move.
10
O Q
PERATION
S
UICK TART
VX-1210 O M
PERATING ANUAL