Maintenance And Storage - Stinger CS150B Manual Del Propietário

MAINTENANCE & STORAGE
MAINTENANCE
1. Disconnect the air hose from the tool when performing inspections,
maintenance, or repairs.
2. Use air line lubricators. If lubricators are not available, or if hose length
exceeds 3 meters, add 2 drops of non-detergent 20-weight oil daily into
the air inlet of the tool.
3. Whenever repairs or replacement of parts inside the body occur, check
the piston "O" ring for adequate grease lubrication.
4. Never use any parts other than genuine STINGER replacement parts. To
order, call 800-746-5659.
5. Periodically clean the Magazine and Nose of the tool with a mild solvent.
STORAGE
1. Disconnect the air hose when storing the tool.
2. Never store the tool in cold weather environments for any duration of
time as any frost or ice formation in the tool will cause tool failures.
3. For prolonged storage, add 2 drops of oil to the air inlet of the tool prior
to discontinuing use. Also clean the exterior of the tool with a mild solvent.
10