Samsung DVE45T6005 Serie Manual De Usuario página 36

Operations
04 Temp.
05 Time
06 Wrinkle Prevent
07 Eco Dry
08 Damp Alert
09 Adjust Time
36 English
Untitled-4 36
Temperature can only be adjusted in TIME DRY cycle. Press to
change the temperature of the current cycle. You can select from
5 different options (Low to High). Please select the appropriate
temperature depending on the items in the load.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Low: For heat sensitive items labeled Tumble Dry Low
or Tumble Dry Warm. Provides the lowest heated drying
temperature possible.
Press Time to select a drying time for the selected cycle. This
is available only with TIME DRY, QUICK DRY, and AIR FLUFF.
This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent cycle.
The Eco Dry function is available with NORMAL and TIME DRY
cycles. On NORMAL cycle, the Eco Dry function can increase the
drying time up to 3 times depending on the temperature and
load while reducing the power consumption.
The Eco Dry function can be set to on or off, and it will be stored
in memory for the next cycle. If the power cord is unplugged or
loses power, the Eco Dry function will be enabled by default.
This alert is available for all sensor dry cycles except for ACTIVE
WEAR and SANITIZE. Available dry levels are Less, Normal, More,
and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the items in the load is 80 % dry. This
lets you take items that you don't want fully dried or that dry
quickly out of the dryer early while letting others continue to
dry.
You can change the set time for the selected cycle. This is
available only with TIME DRY, QUICK DRY, and AIR FLUFF. To
change the cycle time, press Adjust Time
until the desired time is displayed.
or Adjust Time
2020-01-14 12:11:47