Miscellaneous Commands; Maintenance - TTI EL302P Manual De Instrucciones

VO?
IO?
OUT?
M?
ERR?

Miscellaneous Commands

*RST
*IDN?
The Manufacturers or their agents overseas will provide repair for any unit developing a fault.
Where owners wish to undertake their own maintenance work, this should only be done by skilled
personnel in conjunction with the service manual which may be purchased directly from the
Manufacturers or their agents overseas.
Cleaning
If the PSU requires cleaning use a cloth that is only lightly dampened with water or a mild
detergent. Polish the display window with a soft dry cloth.
WARNING! TO AVOID ELECTRIC SHOCK, OR DAMAGE TO THE PSU, NEVER ALLOW
WATER TO GET INSIDE THE CASE. TO AVOID DAMAGE TO THE CASE OR DISPLAY
WINDOW NEVER CLEAN WITH SOLVENTS.
12
Reads and returns the actual output voltage in Volts in <nr2>
numeric format. The syntax of the response is
Example: If the actual output voltage is 12.55 Volts the
response to the command VO? will be 12.55V<rmt>.
Reads and returns the actual output current in Amps in the <nr2>
numeric format. The syntax of the response is
Example: If the output current is 0.93 Amps the response to
the command IO? will be 0.93A<rmt>.
Returns status of the output as
or
Returns output mode status as
or
Returns the value in the error register in the form ERR <nr1><rmt>
0 = no errors.
1 = command not recognised.
2 = command value outside instrument limits.
Resets the instrument to the default power-up settings
(1.00V, 1.00A, output off).
Returns the instrument identification. The exact response is
determined by the instrument configuration and is of the form
<NAME>,<model>, 0, <version><rmt> where <NAME> is the
manufacturer's name, <model> defines the type of instrument and
<version> is the revision level of the software installed.
<nr2>V<rmt>
<nr2>A<rmt>
OUT ON<rmt>
OUT OFF<rmt>
M CV<rmt>
M CC<rmt>

Maintenance