Front Panel Keys And Indicators; Display - Dini Argeo MCWL Serie Manual Usuario

The front panel is designed for quick but simple weighing applications. It consists of an LCD display with easy
to read digits, 25 mm in height, 3 LCD indicators, and below a 4 key, polycarbonate, water-resistant
membrane.
ON/OFF key: allows to turn on and off the instrument.
ZERO/TARE key: allows to zero the instrument or to carry out an automatic tare.
By pressing the ZERO/TARE key for a few seconds one zeros the displayed weight value
(possible for entire load capacity) and the memorization of zero of the instrument.
By pressing the ZERO/TARE key for an instant, one puts as tare the load being borne by the
scale.
F1 key: by pressing it for a few seconds, one can enter a manual tare from the keyboard. When
entering the digits, this key serves to increase the digit being modified (blinking).
F2 key: when entering a tare value from keyboard, this key serves to select the digit to be
modified (blinking). It slides from left to right. If pressed for an istant during standard weighing, it
enables/disables the functioning mode selected (see par.SELECTABLE OPERATING MODES).
If pressed for at least a second, it allows to enter in the USER SETUP.

DISPLAY

The display is LCD with 4 ½ which are 25 mm high. It is fitted with 3 LCD indicators which indicate the scale
status: à0ß, zero scale (point 1, FIG.1); ~, weight instability (point 2 FIG.1); NET, net weight displayed (point
3 FIG.1).

FRONT PANEL KEYS AND INDICATORS

FIGURE 1
5