Selectable Operating Modes - Dini Argeo MCWL Serie Manual Usuario

SELECTABLE OPERATING MODES

Besides the standard weighing function with the tare subtraction, the indicator can carry out an additional
function of either HOLD or PEAK or ACCUMULATOR.
The chosen function may be predisposed by the user, see the USER SETUP.
NORMAL (norM)
Simple display functioning mode, with no function linked to the F2 key.
PEAK (PEAK)
Simple display functioning mode. It is possible to store the maximum detected weight value during the
weighing (PEAK), useful to measure, for example, the break load of the materials. By pressing the F2 key the
peak mode is activated; for an instant the "PEAK" message appears and the maximum weight reached until
that moment is displayed. To return to the displaying of the weight on the scale, press again the F2 key (the
display shows for an instant the message "norM").
The weight value detected will be:
• The maximum before a fast weight drop (measurement of break load).
• The maximum detected persisting on the scale.
HOLD (HoLd)
Simple display functioning mode. By pressing the F2 key for an instant the message "HoLd" will appear, and
then the weight value on the scale will be frozen on the display. To return to standard displaying, press again
the F2 key (for an instant the message "norM" will appear and the weight returns to be the current one on the
scale).
HORIZONTAL TOTALIZER (tot)
This operating mode prepares a sum of sequential weighings; when F1 is pressed, the displayed weight
accumulates onto a total weight (the "SUM" message appears on the display).
In order to avoid repeating a particular Nº the F1 key activates only once (weighing an ingredient more than
once could conceivably happen by pressing the MODE key twice or more); to "re-arm itself" it is necessary to
bring the weight value on the scale to zero (otherwise the display shows "Err").
To view the accumulated total, press F2: the total weight in tons appears on the display for a few seconds,
along with all the indicators turning on; after this, one is asked to zero the accumulated total (the display shows
"Ztot"): with ZERO/TARE one confirms the zeroing, with any other key one returns to weighing without
confirming.
If the accumulated total is equal to 0 kg, the instrument avoids the total resetting request.
The maximum totalizable weight is the full scale value + 9d.
NOTE: the accumlated total is cancelled when the instrument is turned off.
9