IKUSI TM70 Serie Manual De Instalación Y De Utilización página 154

When a Pitch & Catch operation needs to be performed, the user of the transmitter that wants to
Catch the crane must ask the user holding the crane to release the crane. The procedure is the
following: The owner of the crane must press the STOP button while the user that wants to Catch the
crane must be pressing the START button. The receiver will free the ID code and will SCAN new ID
codes and new channels, if in the lapse of time of a passive STOP, it encounters the new ID it will
keep on going without falling the STOP relays.
In the event that the transmitter governing the crane stops while the second transmitter is switched off,
the system will STOP normally and will be free until one transmitter with a valid ID presses the START
button.
When a Pitch & Catch operation is finished, the first transmitter to press START will get hold of the
crane.
This mode of operation is personalised in the remote control EEPROM and must be done by IKUSI
personnel only.
TM70Bi V4.1 (03/12) 1121174.pdf
IKUSI reserves the right to modify this information without prior notification.
44