1- La 70 Infrared Transmitter - IKUSI TM70 Serie Manual De Instalación Y De Utilización

Transmisor botonera
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

make movements start in first speed. If the remote control is provided with a Display, whenever the
transmitter is out of range, the message "Out of Range" will be displayed.
The remote control has got 4 modes of operation defined in the EEPROM:
1.- Range Limiter only at start up (Electronic Key): In order to make the transmitter work, it is
necessary that the transmitter is inside the starting zone, defined by the position of the infrared
transmitter.
2.- Range Limiter only in operation: The transmitter can be started anywhere inside or outside of the
working area, but the movement orders will not work until the transmitter is inside the working zone.
3.- Range Limiter at startup and operation: The transmitter in order to work must be inside the working
zone always.
4.- Range Limiter only as an output Relay: This functionality makes the transmitter not to show In
range or Out of range situation in the transmitter itself. It will not mask any order. The information will
be sent to the receiver in order to process the information as an output relay or a condition to the relay
table.
11.2.1 – LA70 INFRARED TRANSMITTER
This is the element installed in the crane, which generates the infrared modulated radiation with an
identity code, which permits the sensor its identification.
Emission angle in long travel direction is wider than those of cross travel direction. In this way, the
working area covered by a transmitter is similar in shape to an ellipse, whose dimensions depend on
the height of the bridge over the ground. Approximately, the diagonals of the ellipse according to the
height are the following:
h (m)
6
8
10
12
14
16
18
20
In cases in which it is believed that the area covered by one transmitter is not enough, more slave
transmitters can be installed.
TM70Bi V4.1 (03/12)
1121174.pdf
IKUSI reserves the right to modify this information without prior notification.
D (m) ±63º
d (m) ±40º
24
10
32
13
40
17
48
20
56
23
64
26
68
29
70
32
35

Hide quick links:

Capítulos

Tabla de contenido
loading

Productos relacionados para IKUSI TM70 Serie

Este manual también es adecuado para:

T70/1T70/2

Tabla de contenido