Guarantee; Trouble Shooting - Faro FS1010 Istrucciones De Uso

9 Guarantee

The warranty for this sealer is 2 years after commissioning. To obtain guarantee, the purchase
document and the satisfactory guarantee is to be sent within one month after commissioning
to the manufacturer. The guarantee is granted under the condition that the regular servicing
and calibration of the device is carried out by the manufacturer or a service organisation
authorised by the manufacturer.
The guarantee encloses the free repair of the device at the factory and if necessary spare parts
in the guarantee time. Mistakes by transport, improper use or other mistakes of the user are
excluded. All wearing parts are also excluded. All other claims as well as transport cost are
not a part of the guarantee.
Guaranty certificate
Device:
FS 1010
Date of commissioning:*
__________________________________
Users organisation name and address:*

10 Trouble shooting

Please check the following items before contacting the service.
No display:
Is the sealer connected with the current? Is the sealer switched on? Has the sealer been
switched off and on again?
Motor doesn't start:
Is the sealer connected with the current? Is the sealer switched on? Is the motor switched on?
Seam is to strong/weak:
Is the material sealable acc. EN 868-5? Is the temperature for the material adjusted acc.
validation? Is the material fed in correctly?
Material is melted /burned:
Is the material sealable acc. EN 868-5? Is the temperature for the material adjusted acc.
validation?
Istruzioni d'uso/Instructions for use/Mode d'emploi/Istrucciones de uso
Automatic Sealer/Sigillatrice automatica FS 1010 – Rev.00
Serial No.:*
____________________________________
Contact person:*
____________________________________
Tel*
Fax:*
E-mail:*
17