Kruger KGV3000D Manual De Instrucciones página 30

Limpiadora de vapor y aspiración con función detergente o enjuage con agua caliente
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

• Activate the vacuum function at the desired power, fi tting the nozzle or the small brush.
Hard wood fl oors
Warning: Great care should be taken when cleaning varnished wood surfaces.
• Always do a test on a non visible part of the fl oor, to check whether the paint peels off or the surface
is damaged.
• Fit either the large steam/vacuum brush (32) with the frame (32c) or the small steam/vacuum brush
(33) with the frame (33b) according to the size of the surface to be cleaned.
• Set steam power to mimimum and apply for a brief period. Set vacuum power to maximum at the
same time.
Paper, cloth covered surfaces, etc.
Make sure that the covering sticks perfectly to the item; otherwise take great care, as the steam
may further loosen the covering. Fit either the large steam/vacuum brush (32) with the frame (32b)
or the small steam/vacuum brush (33) with the frame (33b) according to the size of the surface to
be cleaned. Set steam power to mimimum and apply for a brief period. Beaded or laminated covers
Refer to "Paper covered surfaces".
C. BATHROOM
Taps, sills, tiles and accessories.
• Use the multi-use nozzle with maximum steam power, and follow the instructions given for "Sinks
and taps".
Shower cab
• In diffi cult corners or interstices use the nozzle alone or together with the small brushes; try not to
vaporise on silicone sealings.
• For embossed glass surfaces, use the small steam/vacuum brush (33) (Fig. 8) with the frame (33b)
(Fig. 8), setting steam power to middle.
• Vacuum at the desired power to dry.
D. WINDOWS AND MIRRORS
Warning: The appliance should not be used on silk printed or painted glass
Clear panes
• When cleaning window panes, remember to pre-heat them during winter, following the instructions
given in par. "Safety warnings".
• Use the window squeegee (33) (Fig. 6).
• Set the steam power to minimum.
• Run the tool rapidly across the window, holding the rubber insert in close contact with the pane.
• Activate both the steam and the vacuum functions at the same time and at the desired speed (to
avoid water drops).
kruger.es
30

Capítulos

Tabla de contenido
loading

Tabla de contenido