Briteq COB PAR56-RGB Manual De Instrucciones página 7

ENGLISH
HOW TO SETUP:
MAIN MENU:
 To select any of the menu options, press the MENU button up to when the required option is shown on the
display.
 Select the function with the ENTER button. The display will blink.
 Use DOWN and UP button to choose the desired menu option.
 Once the required menu option is selected, press the ENTER button to select.
DMX512 Address Setting
Used to set the start address in a DMX setup.
 Press the MENU button until DMX MODE ADDR is shown on the display.
 Press the ENTER button to select.
 Use DOWN and UP buttons to change the DMX512 address.
 Once the correct address is shown on the display, press the ENTER button to confirm.
SLAVE MODE
Used to set the unit in slave mode when you want to have synchronized effects with the master unit.
(when no controller is used and the first unit is running it's automatic programs or is set in a fixed
color)
 Press the MENU button until SLAVE is shown on the display.
 Press the ENTER button to select.
SOUND MODE
Used to set the automatic Sound Mode.
 Press the MENU button until SOUND SENS is shown on the display.
 Press the ENTER button to select.
 Use DOWN and UP buttons to change the sensitivity of the build-in microphone (00 = minimal sensitivity,
31 = maximal sensitivity).
 Once the correct sensitivity is shown on the display, press the ENTER button to confirm.
AUTOMATIC WORKING MODES:
Used to select the standalone working mode you want to use when no DMX controller is connected
 Press the MENU button until STATIC / CHANGE / CHANG3 / CFADE is shown on the display
(depending on the last used mode).
 Press the ENTER button to select.
 Use DOWN and UP buttons to change automatic working mode.
 Press the ENTER button to select.  for each Mode you can now set different values:
1. STATIC COLOR
Used to set a static color for the projector.
 Use DOWN and UP buttons to change the intensity of the Red color (R on the display).
 Press ENTER to confirm  now you can set the intensity of the next color
 Use DOWN and UP buttons to change the intensity of the Green color (G on the display).
 Press ENTER to confirm  now you can set the intensity of the next color
 Use DOWN and UP buttons to change the intensity of the Blue color (B on the display).
 Press ENTER to confirm  now you can set the speed for the stroboscobe function
 Use DOWN and UP buttons to change the flash rate (F on the display).
 When this is done, press the ENTER button to confirm.
2. CHANGE
Used to set the first color changer mode. (all colors)
 Use DOWN and UP buttons to set the speed for the color changer (SP on the display).
 Press ENTER to confirm  now you can set the speed for the stroboscobe function
 Use DOWN and UP buttons to change the flash rate (F on the display).
 When this is done, press the ENTER button to confirm.
BRITEQ
®
5/40
USER MANUAL
COB PAR56-RGB