4.3 Routine Inspection
4.3.1 Advice
When checking the tension of the belts or chains, DO NOT
introduce your fingers between the belts and the pulleys and nor between
the chain and the gears.
4.3.2 Precautions
Check if motors and sliding or turning parts of the machine produce
abnormal noises.
Check the tension of the belts and chains and replace the set when
belt or chain show signs of being worn out.
When checking tensions of belts or chain DO NOT introduce your
fingers between belts and pulleys, nor between the chains and gears.
Check protections and safety devices to make sure they are working
properly.
4.4 Operation
4.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by
turning parts which could lead to a serious accident. Tie your hair well up
and/or cover your head with a scarf.
The operation performed by not trained or skilled personnel shall be
forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under perfect
conditions.
4.5 After Finishing The Work
4.5.1 Precautions
Always TURN THE MACHINE OFF by removing the plug from the
socket before cleaning the machine. Never clean the machine unless it
has come to a complete stop. Put all components back to their functional
positions before turning it ON again. Check level of oil. DO NOT place
your fingers in between belts and pulleys nor chains and gears.
09
1.2Composants Principaux
Tous les composants qui font partie de la machine ont été construits avec des
matériaux soigneusement choisis pour leurs fonctions , suivant les manuels d'essais
et l'expérience acquise par Siemsen .
La Tête de Hachage reçoit un traitement superficiel pour isoler la tête et
faciliter le nettoyage .
Le couteau et la plaque sont construit en acier tempéré pour assurer une durabilité
supérieure à la qualité du tranchant .
Figure - 01
03
07
02
01 - Tête de Hachage
02 - Cabinet
03 - Interrupteur
04 - Plateau d' Alimentation
05 - Poussoir
06 - Volant
0 7 - B o u t o n d u P r o t e c t e u r
Thermique
05
06
04
01
26
Capítulos
