Using The Power Nutri Cup - Ninja FOODI SS351 Serie Guia Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USING THE POWER NUTRI™ CUP
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: If the unit is plugged in and powered
on, but the cup and blade assembly is not
properly installed, the timer will display "- -"
and the motor will be disabled.
NOTE: Auto-iQ® programs have pauses and
changes in speed throughout the cycle.
1
Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
2 Add liquid then ingredients to the Power
Nutri Cup. DO NOT add ingredients past
the MAX LIQUID line.
3 Place the Hybrid Edge™ Blades Assembly
on the top of the cup and turn clockwise
to seal.
18 ninjakitchen.com
4 Turn the cup upside down and install on
the motor base by aligning the tab on
the cup with the slots on the base. Then,
rotate cup clockwise until it clicks. Once
locked in place, press the Power button
to turn unit on. The available program
buttons will illuminate and the unit will
be ready for use.
5a If using an Auto-iQ program, use the
dial to select the program that best
suits your desired output, then press
START/STOP. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press START/STOP.
5b For Manual mode, press IQ/MANUAL.
With speed 10 on the display, press
START/STOP. Once the ingredients have
reached your desired consistency, press
START/STOP and wait for the unit to
come to a complete stop.
NOTE: Only speed 10 is available when

using the Power Nutri Cup .

6 Remove the cup from the motor base
by turning it counterclockwise and then
lifting up.
7 Remove the blade assembly by twisting
counterclockwise. DO NOT store blended
contents with the blade assembly
attached. Only use the Spout Lid or
Storage Lid to cover. Exercise care when
handling the blade assembly, as the
blades are sharp.
8 To enjoy on the go, place the Spout Lid
or Storage Lid onto the cup and twist lid
clockwise until firmly sealed.
9 Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
ninjakitchen.com
19
Tabla de contenido
loading

Tabla de contenido