Tabla de contenido
Idiomas disponibles
Idiomas disponibles
!
!
MANTENIANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to
reduce the risk of fire, electric shock to persons or damage.
Light Bulb Replacement
Light bulbs need to be replaced when you notice a dark section of the
flame or when the clarity and detail of the log exterior disappears. There
are one bulb under the log set.
WARNING
Allow at least 5 minutes for light bulbs to cool off before touching bulbs
to avoid burning of skin.
I. Bulb Requirements
Quantity of 1 clear chandelier or candelabra bulbs with an E-14(small)
socket base, rating voltage 120 volts, rating power 40 watts.
CAUTION
Do not exceed 40 watts per bulb
II. Operation
1. Open the light bulb area:
The light bulb area is at the front of electric fireplace, see "E" .there are
6 screws on it.loosen the screw by some tool, then you can open it.
(Under figure)
2. Examine the bulbs to determine which bulbs require replacement.
3. Remove old bulb and replace a new one. Hold the socket while
unscrewing or screwing bulbs. (Right figure)
4. Replace the cover of light bulbs.
5. Done.
!
!
!
Correct Disposal of this product
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of
material resources. To return your used device, please
use the return and collection systems or contact the
retailer where the product was purchased. They can
take this product for environmental safe recycling.
*)!
!
"+!
Tabla de contenido
