WELDY ENERGY 1600 Instrucciones De Funcionamiento página 2

Hot Air Tool / ENERGY 1600; ENERGY 3400
Please read operating instructions carefully before use
and keep for future reference.
English
Applications
Français
Welding of thermoplastics as well as individual thermoplastic elastomer and
elastomer bitumen in the form of plates, pipes and profi les, sealing layers,
coated fabrics, foils, foams, tiles and layers.
Español
Heating for forming, bending and coupling of thermoplastic components.
Drying of moist surfaces.
Português
Shrinking of heat-shrinkable sleeves/hoses, solder connectors as well as
中文
packaging for electrical components.
Soldering of copper tubing, solder connectors and metal foils.
Activating and dissolving of solvent-free and hot-melt adhesives or solvent-free
paintures.
Warning
Danger to life when opening the tool as live components and connec-
tions are exposed. Unplug the line/mains plug from the plug socket
before opening the tool. Before putting into operation, check power
supply cord and connector as well as extension cable for electrical
and mechanical damages.
Fire and explosion hazard if hot air tool is used incorrectly, especially
near combustable materials and explosive gases.
Danger – burn hazard ! Do not touch heater tube and nozzle while
they are hot. Allow the tool to cool down. Do not point the hot air fl ow
in the direction of people or animals.
2
Original-Bedienungsanleitung
Caution
Warranty
• For this tool, we generally provide a warranty in accordance with the statutory /
country-specifi c regulations from the date of purchase (verifi ed by invoice or
delivery document). Damage that has occurred will be corrected by replacement
or repair. Heating elements are excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded
from the warranty.
• Warranty claims will be rejected for tools that have been altered or changed by
the purchaser.
Disposal
Power tools, accessories and packaging should be sorted for environmen
tal-friendly recycling.
The voltage rating stated on the tool must correspond to the mains
voltage.
For personal protection on building sites we strongly recommend
the tool be connected to a RCCB (Residual Current Circuit Breaker).
The tool must be operated under supervision. Heat can ignite
fl ammable materials which are not in view.The machine may only be
used by qualifi ed specialists or under their supervision. Children
are not authorized to use this machine.
Protect tool from damp and wet.