Technical Specifications - Chicco Essential Digital Video Baby Monitor Instrucciones De Uso

rve insertion polarity as indicated in the
the battery compartment.
to Reposition the Alkaline battery com-
partment closing panel (10) first in-
hat serting the lower panel hooks in their
his battery compartment housing and
The gently pushing the panel downward
is (fig.2).
nly 3.2 Installing or replacing the lith-
us- ium-ion battery supplied with the
ied parent unit
re- Upon purchase, the 3.7 V 1800mAh
an rechargeable lithium-ion battery (13)
the in the parent unit is kept separately in
rge the product packaging.
Carefully remove the lithium-ion bat-
ery tery from its packaging.
ent Remove the rechargeable battery
ean compartment closing panel (10), plac-
th. ing your finger near the top groove
or and gently pulling the panel outward
its (fig.5).
Insert the lithium-ion battery (13), re-
ing specting the proper insertion polarity
in- as indicated in the battery compart-
ce- ment.
Reposition the rechargeable battery
um compartment closing panel (13), first
inserting the lower panel hooks in
ery their battery compartment housing
and gently pushing the panel toward
the the product (fig.6).
If the duration of the rechargeable
lithium-ion battery is reduced exces-
at- sively, this means that it has run out
and therefore must be replaced (this
art- is to be considered normal because
ger rechargeable batteries run out over
the time).
Remove the run out rechargeable bat-
nt, tery (13) and replace with another
AA/ rechargeable battery that is identical
per to the 3.7V 1800mAh supplied with
the product (code20256600100 to
be requested directly from Artsana
S.p.A.) taking care to place them with
the correct insertion polarity indicated
on the battery compartment.

TECHNICAL SPECIFICATIONS

- Visual and voice transmission via
"Adaptive frequency Hopping" digital
technology system.
- Outdoor operating range of about
150 metres without obstacles.*
* The maximum operating range is
about 150 metres in an open field with
no obstacles and with fully charged
batteries (the range, however, could
be reduced substantially within a
home, depending on particular en-
vironmental conditions, layout of
walls and furniture in the home and
the presence of metallic structures,
external and internal interference/
electromagnetic fields, concrete walls
or between rooms on different floors
or because batteries are not fully
charged, etc.).
Baby unit
Power:
Internal: FOUR 1.5V AA/LR6 ALKA-
LINE BATTERIES
External: via 100-240V~ 50/60Hz
/6.5V 550mA mains switch-
ing adapter
Transmission:
- Transmission frequency band: 2400-
2483.5MHz
- Signal strength: 100mW max
LED infrared radiation: emissions be-
low LEA Class 1, standard EN 60825-1
Parent unit
Power:
Internal: 3.7V 1800mAh LITHIUM-
23