Pre-Installation Info; Pack Contents - KS ALVA Guía De Instalación Y Mantenimiento

PRE-INSTALLATION INFO

Check contents
separate all parts from the packaging and check each part with the "Pack contents"
section.
make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your touch free soap dispenser
until you obtain the missing parts.
Warnings
do not install the system facing a mirror or any other electronic system operated
by an infrared sensor.
to prevent reflection problems, it is recommended to keep a minimum distance of
1.50 meters between the soap dispenser and any other objects.
ImPoRtant: Keep in mind that when using the faucet installed next to
the soap dispenser, the user hands should not interfere with the soap
dispenser sensor detection area.
liquid soap dispensers, with proper care, will provide long term trouble free
service. Quality liquid soap of recommended viscosity and pH levels are the main
factors for smooth operation of your dispenser. If needed, use a viscometer to
verify the viscosity of your soap to ensure maximum benefit. the recommended
range for liquid soap viscosity is 100-3800 cPs. thicker liquid soap flows slower
and inhibits the pump valve, causing strain and damage.
liquid soap dispensers are suitable for use with any generic liquid soap of the
correct viscosity and pH. the pH level of all soap used in Kassel liquid soap
dispensers should be between 6.5 to 8.5. lower levels will cause corrosion to the
metal dispenser and even the rubber and plastic components. Higher pH levels
will cause swelling to rubber parts and degradation of plastic components over
time.
2

PACK CONTENTS

Familiarize yourself with the part names and ensure that all the parts are
included in your package.
1 X BODY AND FIXING ACCESSORIES
1 X SOAP TANK WITH BOTTLE SUP-
PORT AND PUMP ASSEMBLY
1 X BATTERY BOX FOR 6XD ALKALINE
BATTERIES \ 12V TRANSFORMER
3