Responsibility; Check Incoming Materials - Pfannenberg EB 210 Guía Rápida

EN
Residual risks according to 2014/68/UE Directive:
•
Although the unit is designed with all the possible safety requirements, in case of external fire there is the
possibility that the internal pressure and temperature of the unit will increase in a dangerous and
uncontrollable way; in that case use the extinguishing tools suitable for that conditions.
For the series production of the standard units of category , the pressure resistance test (typically the
•
hydrostatic pressure test) is made on a statistic base, not on all units.
This can be accepted, also considering all the safety devices mounted on the units.
•
For units without emergency switch-disconnector: chiller user must install the emergency switch-
disconnector installation close to the chiller, in an accessible and clearly visible place, to allow emergency
stop of the unit and safety for the operator.
•
Even if the instructions contained in this manual are enough explanatory for safety, high pressure
switches/safety valves are mounted, to guarantee intervention in case of wrong filing, or in case of
malfunction due to not controlled increase of pressure and temperature.

4. Responsibility

NOTICE
Hereby, the manufacturer declares that any form of liability will be refused if it can be attributed to improper use,
unauthorized modifications or disregard of the instructions given in this manual.
The warranty expires as soon as one of the above conditions applies.
The customer / operator is obliged to provide this manual and all related documents to those responsible for
installation, operation, maintenance and repair.

5. Check incoming materials

NOTICE
•
Perform a visual inspection for transport damage when unpacking the chiller. Take note of any loose
parts, dents, scratches, visible loss of liquid etc.
•
Inspect and secure the packaging material for any loose functional parts before disposal.
External visible damages:
 Report any damages to the freight carrier immediately and accept the material with reserve. Observe the
"Terms for Cases of Damage".
 Precise information about defects, must be provided for the handling of warranty claims. Always specify the
type designation and serial number.
Internal not visible damages:
 If the package is damage report any damages to the freight carrier immediately and accept the material with
reserve. Observe the "Terms for Cases of Damage".
 Internal damages should be notified within 8 days from the incoming date.
Pfannenberg GmbH 15 / 60