Function; Starting Treatment - cefar IFC Manual De Instrucciones

FUNCTION

6
Indicates that the keylock
is activated.
Turns the stimulator on and off. Turns the stimulator on and off.
Selects programs 1–7.
Programming button for P7.
Used to confirm settings
for P7.

STARTING TREATMENT

1. Connect the electrodes to the cables.
Wash and dry the skin well before
applying the electrodes. If the skin is
hairy, it may need to be shaved.
2. Place the electrodes in the area to
be treated. See the Programs and
Electrode Placement chapter.
3. Switch the stimulator on with
4. Select a program using P.
5. Increase the amplitude with
6. When the program time runs out,
2470-200509_CEFAR_IFC_manual_inlaga_outline.indd
.
.

6
Number of program
Shows remaining run
time for the program.
Shows the selected
Increases amplitude.
button to increase the
amplitude continuously.
Note: Be very careful
when increasing the
Reduce amplitude. Press
and hold the button to
decrease the amplitude
continuously. Also deacti-
the stimulation switches off and the
timer symbol blinks. Switch the sti-
mulator off with . If you do not
switch the stimulator off, it turns off
automatically after 5 minutes to spare
the batteries.
2005-09-14, 15:18
phases.
amplitude in mA.
Press and hold the
amplitude.
vates the keylock.