Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing
any attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, pitcher, bowl,
Nutri Ninja
cup, cutting discs and blade
®
assemblies in warm, soapy water. When
washing the blade assemblies and cutting
discs, use a dish-washing utensil with a
handle to avoid direct hand contact with
blades. Handle blade assemblies and cutting
discs with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade
assemblies, cutting discs and attachments
are all dishwasher safe. The lids, cutting discs
and blade assemblies are top rack dishwasher
safe. Ensure that the blade assemblies and
cutting discs are removed from the containers
before placing in the dishwasher.
WARNING: Handle the Stacked Blade
Assembly, Chopping Blade Assembly,
Nutri Ninja Blade Assembly, Grating Disc
and Slicing/Shredding Disc with care
when washing, as the blades are sharp.
Contact with the blades' edges can result
in laceration.
3 Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing
needs to be performed on the appliance at
1-877-646-5288.
HOW TO STORE
1 Store the Ninja Ultima
the blade assembly inside the corresponding
container with the lid secured on top. Do
not place anything on top. Store the rest of
the attachments in a safe place where they
will not be damaged and won't cause harm.
Loosely wrap the power cord around the
motor base.
RESETTING THE MOTOR THERMOSTAT
The Ninja Ultima
System features a unique safety
®
system which prevents damage to the unit's
motor and drive system should you inadvertently
overload your appliance. If the appliance is
being overloaded, the motor will stop. Allow the
appliance to cool for approximately 15 minutes. To
reset the appliance, follow the resetting procedure
below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure
that no food is jamming the cutting blades or
attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug
the appliance into the electrical outlet.
5 Proceed to use the appliance as before making
sure not to exceed the recommended maximum
capacities.
www.ninjakitchen.com
System upright with
®
21
Tabla de contenido
