Setting The Test Reminders - Roche Diagnostics Accu-Chek Performa Nano Instrucciones De Uso

Meter Memory, Setup, and Data Transfer

Setting the Test Reminders

NOTE
Test reminders:
• beep at the same time each day.
• beep every 2 minutes up to 3 times.
• turn off by inserting a test strip or pressing any
button.
1
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold until
set‑up appears on the
Press and release
display.
repeatedly until the bell
symbol, OFF, set‑up,
and the flashing A‑1
appear on the display.
53074_07214103002_EN.indb 23
• If a test was performed within 15 minutes of a
test reminder, the test reminder does not beep.
• If the meter is on at the test reminder time, the
test reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
• If a test reminder is off in set‑up mode, any
subsequent test reminders are also off. For
example, if you set A‑1 but turn off A‑2, then
A‑3 and A‑4 will automatically be off.
2 3
Press and release
to switch between On
and OFF.
or
Press and release
set your choice.
If On is selected, the
hour flashes.
3
4
or Press and release or
to adjust the hour.
Press and release to
to set the hour.
The minutes flash.
23
2/5/15 9:39 AM