Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Further functions
MENU
Timer function
The timer function is selected with the timer-button
MENU
temperature for a programmable period can be entered. This can be very useful in case of a party, for
OK
example. Press
First, the time for which the time programme has been deactivated is shown.
Confirm with
Now, the desired temperature can be set. Confirm with
OK
it is not possible to change the temperature manual, the wheel is locked. Press
Offset
If the perceived temperature significantly differs from the set thermostat temperature a temperature set
up can be executed. Press
0,0 C
The degree setting
(from -5 up to +5°C) with the selector wheel. Confirm your entry with
doesn not change!
Window function
If you open a window and consequently the temperature drops significantly, the programmable
thermostatic head will automatically close the heating valve in order to save energy. The display will
show
. Afterwards, the programmable thermostatic head will resume normal operation. For the set up
WINW
select
the menu. Confirm with
MENU
MID
high sensibility,
= medium sensibility (factory preset),
MENU
Now, you enter the time (10 min (factory preset) - 60 min) for which the valve should remain closed.
Confirm with
OK
OK
Travel function
For the time you are absent you can select an individual temperature. After this period the originally
defined programme becomes active again. Press
(suitcase
appears on the display). Select with the selector wheel the end of the travel function (=
MENU
date of the recommencement of the regular heating times). Confirm with
confi rm with the button
confirm with
.
OK
MENU
Child lock
You can lock the programmable thermostatic head to protect the device from unauthorized activation.
Press the buttons
OK
display in order to lock the device. By using this button combination again the symbol disappears and
you release the lock.
MENU
MENU
Heating pause – Closing the programmable thermostatic head
MENU
Press
. Select the menu item
MENU
OK
confirm with
. Set the temperature on the display to
OK
The valve is now closed and will work without a time programme. The calcification protection function
OK
OK
remains active once a week. After the heating pause you switch in the menu to the AUTO-mode and the
personally set programme will be executed again.
Daylight saving time
DST
Press
. Select
MENU
the selector wheel. The programmable thermostatic head switches automatically from summer to winter
time.
OK
LCD standby indicator
Press
. The menu item
MENU
OFF
with the selector wheel. After about 30 seconds, the LCD indicator switches into standby mode. By
pressing any button, the display will be activated again. (by removing the battery, standby mode will be
reseted). Increases the battery life time.
OK
. Select the menu item
MENU
will flash on the display. Now, set up the desired adaptation for the temperature
OK
MENU
. First, the sensibility is selected with the selector wheel (
OK
MENU
OFF
. The signal
appears on the display. Now set the temperature and
OK
appears on the display. With
MENU
OK
+
at the same time for about 2 seconds until the signal
MODE
with the selector wheel. Confirm with
with the selector wheel. Confirm with the
STBY
with the selector wheel. Confirm with the
MENU
OK
. With this function a user-defined
MENU
OFFS
with the selector wheel. Confirm with
OK
LOW
= low sensibility). Confirm with
. Select the menu item
MENU
OK
the function can be deactivated.
MENU
OK
OFF
.
MENU
OK
MENU
. In the selected period
OK
and unlock it.
MENU
OK
. The temperature display
MENU
OK
MENU
HOLI
. Confirm with
. Set the time and
OK
appears on the
MENU
MANU
. Select
OK
ON/OFF
button and select
MENU
MENU
OK
button and select
OK
MENU
.
OK
HIGH
=
MENU
OK
and
with
ON/
Tabla de contenido
