Basic Operating Modes - Genebre 72501 Manual Del Usuario

Basic operating modes

MANU-Modus
In the MANU-mode the programmable thermostatic head adjusts to the manually specified temperature.
AUTO-Modus
In the AUTO-mode the programmable thermostatic head changes between to temperatures according
to the time programme that has been set:
Comfort temperature
Economy temperature
The heating and economy times can be specified via the adjustable time programme. It is possible to
set 8 switch points (4 heating and 4 economy times) per day at the most. The programmable
thermostatic head has the following factory preset:
Heating time:
MENU
Economy time:
MENU
Setting heating and economy times
OK
With the programmable thermostatic head it is possible to set 4 heating and 4 economy times per day –
one for each day or one for a block of several days. DAY1 to DAY7 represent the weekdays from Monday
OK
to Sunday. Additionally, the corresponding days are shown as abbreviation below the menu bar on the
display.
Block construction:
D 1–5 = same programme from Monday to Friday
D 1–6 = same programme from Monday to Saturday
D 1–7 = same programme from Monday to Sunday
 For non-programmed days the factory preset remains active.
Setting of an individual programme:
Press . Select the menu item
MENU
on the display. Select day/block with the selector wheel. Confirm with
heating time with the selector wheel. Confirm with
with the selector wheel. Confirm with
OK
can be entered.
 If you do not want to set a further heating/economy time confirm " ---- " with
The next day for programming is shown on the display.
MENU
 If you do not want to enter a further day, leave the menu with
the display the programming is fi nished. Within the blocks you can also overwrite single days with
differing times.
OK
Setting comfort and economy temperature
Press . Select the menu item
MENU
temperature with the selector wheel. Confirm with
selector wheel. Confirm with
OK
OFF
Area : 8°C, freeze protection function is active
ON
Area : valve is completely open
 By the way: Maximum energy saving can be obtained with an economy temperature which is about
5 °C below the comfort temperature.
Manual operation
With the selector wheel an adaptation of the room temperature is possible at any time. In the
AUTOmode it remains active until the next switch point is reached. Now, the usual programme becomes
active again.
(factory preset 21°C)
(factory preset 16°C)
Heating with comfort temperature (factory preset: 1st heating time at 07:00)
lowering to economy temperature (factory preset: 1st economy time at 22:00)
PROG
MENU with the selector wheel. Press
. Now, if desired, a 2nd, 3rd or 4th heating/economy time
OK
MENU
TEMP
with the selector wheel. Confirm with
.
OK
MENU
MENU
MENU
OK
OK
. Set the beginning of the 1st economy time
OK
. If the temperature is shown on
MENU
MENU
OK
. Set the economy temperature with the
OK
. DAY1 for Monday is shown
. Set the beginning of the 1st
MENU
.
OK
MENU
. Set comfort
OK
MENU
OK