Spares And Accessories; Maintenance & Servicing - Bibby Scientific Stuart SCF1 Instrucciones De Funcionamiento

8. To remove the rotor, turn the power switch
on the back of the unit to 'Off'. Squeeze the
clips of the motor shaft using two thumbs
and lift the rotor away from the motor shaft.
Maintenance & Servicing
WARNING: Ensure the unit is
disconnected from the mains electricity
supply before attempting maintenance
or servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST
be undertaken by suitably qualified
personnel.
For a comprehensive list of parts required by
service engineers conducting internal repairs,
please contact the Service Department, quoting
both the model number and serial number:
E-mail: [email protected]
Tel: +44 (0)1785 810475
Fax: +44 (0)1785 810471
Only spare parts supplied or specified by Stuart
or its agents should be used. Fitting of
non-approved parts may affect the performance
of the safety features designed into the
instrument. If in any doubt, please contact the
Service Department of Bibby Scientific Ltd. or the
point of sale.
For any other technical enquiries, please contact
the Technical Support Department:
E-mail: [email protected]
Tel: +44 (0)1785 810433.

Spares and Accessories

Description Catalogue Number
Micro tube rotor SCF1/1
Strip tube rotor SCF1/2
Warranty
Stuart warrants this equipment to be free from
defects in material and workmanship, when used
under normal laboratory conditions, for a period
of three (3) years. In the event of a justified
claim, Stuart will replace any defective
component or replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused
by installation, adaptation, modification, fitting
of non-approved parts or repair by unauthorised
personnel.
Bibby Scientific Ltd.
Beacon Road,
Stone, Staffordshire
ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 813748
E-mail: [email protected]
www.stuart-equipment.com
3