Clatronic CDP 549 Instrucciones De Servicio página 30

5....-05-CDP 549
GB
Programmed Play
1. Press the STOP key
2. Press the PROG key.
3. PROG and „00" (track number) flashes on the display.
The memory slot number can be seen on the right.
4. Select the desired track with the PREV/NEXT button and press the PROG key
again.
5. The display changes to memory slot 02.
6. Select the next track with the PREV/NEXT key and press the PROG key again.
Repeat the procedure until all the desired tracks are selected.
7. Press the PLAY/PAUSE key. The playback starts. Press this button to pause
briefly the playback.
8. Press once the STOP key to stop the playback while retaining the program.
9. To resume the playback of the program press first the PROG key once and then
the PLAY/PAUSE key.
10. To delete the program, press the STOP key twice.
The device stops automatically once the entire sequence of programmed tracks is
completed. The programmed sequence remains in the memory until the CD is
taken out of the CD deck or until the device is switched off. In order to play the pre-
programmed order of tracks again, press the PROG button and then start the play-
er.
It is possible to combine the pre-programmed tracks with the MODE function. After
you have programmed the tracks and started the machine, please press the MODE
button up to three times so that the functions „
can be used as described in the section entitled "MODE".
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
30
16.04.2003 16:27 Uhr
Press a fourth time =
Press a fifth time =
Seite 30
The word "SHUFF" flashes in the
display. All the tracks are played
one after other at random.
all the functions are reset.
The normal play mode is resumed.
1", „ ALL" and „INTRO"