Idiomas disponibles
Idiomas disponibles
In some circumstances, the device may encounter dead halt during use.
This device has design with built-in a mini tact switch which located at the
behind of the earphone jack, so it can provide reset function to restart the
device by pass through the earphone jack hole.
To Reset:
Use a 1mm stick or similar object (like tooth stick), and carefully insert
the stick, use dull side, into the earphone jack hole until you feel to hit
the end. Actually that is the tact switch button surface.
Then add a bit of force and you will get a click sound and feeling return
from switch. The device is reset and restart in seconds.
Important: Do not reset the device if it is proper working.
S. Trouble Shooting
Unit cannot turn ON • Check battery is it charged with enough energy.
No sound is heard
from headphone.
Characters in LCD
are corrupted
Download of media
files fails.
Bluetooth can't pair
and connect to a
Bluetooth
receiver
device
T. Frequently Asked Question
Where can I find
updates and
download?
U. Specification
Dimension
Weight
LCD
PC connection
• Check whether Volume is set "0" and connect the
headphone plugs firmly.
• Check whether the headphone plug is dirty.
• Corrupted MP3 may make a static noise and the
sound may cut off. Make sure that the music files
are not corrupted.
• Check whether the right language has been
selected.
• Check whether USB cable is damaged and is
connected properly.
• Check whether driver is installed correctly.
• Check whether Micro SD memory Card is in full.
• Make sure Bluetooth receiver supports A2DP.
• Make sure Bluetooth receiver is placed within
connection distance in 5 – 10 meters.
• Make sure Bluetooth receiver has already
entered into pairing mode.
• Check for latest Software update at
http://www.lenco.com/support/firmware/
85mm (H) x 41.5mm (W) x 9.0mm (D)
28.5g
1.8 inches, Resolution (RGB) 128 x 160
USB 2.0 (High Speed)
21
