Display And Operating Elements; Enter Push Button; Identification Fields; Measured Value - Dynisco SPXD Manual De Instrucciones

6 Operation
14

6.2 Display and operating elements

ƒig. 7: Display and operating elements

Measured value:

5 digit, LC display, indicated are:
•
Instantaneous numeric measured value (in operation).
•
Dialogue setting up text.
Bargraph:
The bargraph displays the scaled measuring range. It indicates the
instantaneous percentage measured value.
Enter push button (E):
Entry into set-up menu.
•
Selection of operating function in a function group.
•
Saving set-up data.
Selection push buttons (+, -):
•
Selection of a function group within the menu.
•
Setting up parameters and numbers. (If the push button is conti-
nuously held down then the number change on the display increa-
ses).
•
The actual loop circuit current is displayed if the +/- push buttons are
held down in operation mode.

Identification fields:

Additional information can be written into the identification fields.
In order to do so, follow these instructions:
•
Degrease and clean the fields.
•
Write onto the fields using a light and water resistant transparency
pen.
Digital field display