Safety System; Main Components - SOLAC TV8420 Instrucciones De Uso

SAFETY SYSTEM

• The appliance is equipped with an OVERHEATING DISCONNECTION system.
If a problem occurs, this system automatically switches off the appliance. If
this happens, proceed as follows:
1) Unplug the appliance from the mains.
2) Allow it to cool for 15 minutes.
3) Ensure that there is no dust or other obstacles that obstruct the air
flow.
4) Clean the grills, using a vacuum cleaner if necessary.
If the appliance still fails to work as normal, please contact the Technical
Service Centre.

MAIN COMPONENTS

1. Power selector
2. Temperature regulator
3. Operating indicator
4. Front grill
5. Rear grill
6. Dust filter
OPERATION
• Plug your fan heater into the mains.
• Slide the temperature regulator over to the desired power position.
• If you would like to keep the room temperature stable, slide the temperature
regulator (2) to maximum.
• Place the power selector control (1) in the desired position:
| Minimum power
|| Maximum power
• When the room has reached the desired temperature, slowly slide the tem-
perature regulator (2) to the left until a soft "click" is heard. The fan heater
will switch off. The appliance will switch on and off in order to maintain the
right temperature in the room.
• In order to turn off the fan heater, place the power selector (1) in position
0, and unplug the appliance from the mains.
• If you would like to prevent temperatures below 5º C in the room, select
the position using the temperature regulator (2) and the minimum
power position on the power selector (1). The fan heater will turn on when
the room temperature drops below 5º C.
Termoventilador 8420 9
9
8/5/06, 10:39:37