Set-Up Mode - HOMMELWERKE T500 Manual De Instrucciones

2.3.5 Set-up mode

Saving measurement results
22
The DATA SAVE function enables the results
of 125 measurements to be saved consecu-
tively. The last 10 measurements are saved
with compressed profiles. The final measure-
ment is saved with the complete profile
(2000 measuring points).
jÿ
Note: If the number of set measurement
values is exceeded, the results of the final
measurement will not be overwritten.
Activate memory: see Chapter 2.3.5. Set-
ting mode
To erase individual values from the
memory: Select any parameter in setting
mode (R a , R z , R max , press the m but-
ton and hold.
The display shown opposite will appear.
When the m button is released, the last set
of measurement results (set 3 in this case)
will be erased from the memory.
jÿ
Note: Only the final measurement can be
erased. Free selection of results to be erased
is not possible.
Resetting the whole memory (software
version 1.22 onwards) :
Press and hold the m button (as for
erasing individual values), simultane-
ously turn the knurl and then release the
m button. The contents of the whole
memory will be erased.
jÿ
Notes:
See Chap. 2.4.2. Resetting for software
version
To erase the memory with older software
versions, see SAVE function, chapter
2.3.5 Setting mode "Memory configura-
tion".
T500