Enable/Disable The Remote Control - LEGRAND 6830 31 Manual De Uso

Customizations
Set the measurement unit of the temperature
Sets the measurement unit of the temperature: Celsius or Fahrenheit
(default is Celsius).
• Use the ÅÇ keys to select the option "Degrees"
• Press OK to confi rm
A screen will be displayed showing the indication of the preset measure-
ment unit.
• Press OK to change the measurement unit
• Press C to exit the menu and to return to the previous page.

Enable/Disable the Remote control

Enables/Disables the remote control using a telephone actuator of the
Chronothermostat (default is Enabled).
The remote contact is managed as follows:
Closed= antifreeze mode activation
Open= last set weekly programme
• Use the ÅÇ keys to select the option "Remote control"
• Press OK to confi rm
The display shows the preset status.
• Press OK to change the status
• Press C to exit the menu and to return to the previous page.
Adjust the Display contrast
Adjusts the contrast of the graphic display.
• Use the ÅÇ keys to select the option "Contrast"
• Press OK to confi rm
• Press OK to confi rm and to go back to the previous page or press C
to exit the menu and to return to the previous page, hence cancelling
the change.
Select the Screen Saver
Selects what you want to show on the Chronothermostat display when
in idle condition (default is Temp/date/time).
You can select the following:
1: Only Temp. - temperature measured
2: Temp./date/time - temperature measured and date/time
3: Main - complete main screen
4: Off - display completely off
• Use the ÅÇ keys to select the option "Screen Saver"
• Press OK to confi rm
The display shows the currently set selection.
• Use the ÅÇ keys to select the "Screen Saver"
• Press OK to confi rm and to go back to the previous page or press C
to exit the menu and to return to the previous page, hence cancelling
the change.
Please note:
maximum battery duration is guaranteed when the display is OFF.
Select the Language
Selects the language for the menu (default is Italian).
• Use the ÅÇ keys to select the option "Language"
• Press OK to confi rm
The display shows the currently set selection.
• Press OK to confi rm and to go back to the previous page or press C
to exit the menu and to return to the previous page, hence cancelling
the change.
26