Krups 3MIX9000 Serie Manual De Uso página 9

KR-BATT-MIX-2551060-02-new.e$S 05/06/13 15:37 Page15
1.3 D
ISASSEMBLY
Switch the appliance off before removing the whisks or mixers from the preparation (to avoid splashing).
Return the button to the "0" setting (fig. 1).
Disconnect the appliance.
Release the whisks, mixers or the multi-blade whisk (depending on the model) by pressing the ejection
button (a4) (fig. 6).
1.4 C
LEANING
Disconnect the appliance.
The whisks, mixers or the multi-blade whisk (depending on the model) must be removed before cleaning
(fig. 6).
Clean the whisks, mixers or multi-blade whisk (depending on model) immediately after use to prevent any
remaining egg or oil mixture sticking or drying.
You can clean the whisks, mixers or the multi-blade whisk (depending on model) with a sponge and
washing up liquid. They are also dishwasher-safe.
Clean the body of the appliance using a damp sponge only and dry carefully.
Never place the appliance in the dishwasher.
Do not use scouring pads or objects containing metal parts.
Never immerse the body of the appliance in water (fig. 7).
2 -
BASE SUPPORT ACCESSORY WITH ROTATING BOWL: kneading, mixing, beating, emulsi-
fying, whisking (depending on model)
2.1 A
SSEMBLY
The base support is used with the mixer equipped with whisks or mixers. To use these accessories, refer
to section 1 – WHISK, MIXER
Never use the multi-blade whisk with the base support.
To place the mixer on the base support, open the rear hatch (a5) (fig. 8) and attach the product to the ar-
ticulated arm until it clicks (fig. 9).
Press the button (b6) at the rear of the base support to release the articulated arm (b1) and tip it in the
raised position using the mixer handle (fig. 10).
Insert the whisks or mixers until they are completely locked, placing the toothed accessory into the toothed
opening (fig. 11).
Insert the spatula handle (b4) into the slot on the articulated arm. This spatula scrapes the ingredients to
the mixing area of the bowl (fig. 12).
Position the bowl.
Release the articulated arm (b1) by pressing the button (b6) on the rear of the base and lower it until it
locks (fig. 13).
The incline and rotation of the bowl ensures optimum mixing.
Connect the mixer to the mains socket.
2.2 U
SE
Depending on the quantity to prepare, place the ingredients in the container provided (bowl (b3)).
Turn the appliance on using the speed selector (a3). Increase the speed gradually as the preparation
thickens (fig. 4). Your appliance has a Turbo button which instantly provides full power by simply pressing
the button (fig. 5).
Note:
- Do not turn the mixer on with the articulated arm (b1) raised.
- Do not use the appliance for more than five minutes with the whisk or five minutes with the mixers, when
at maximum speed or in the Turbo setting.
- The maximum quantity of dough, including all ingredients, is 2 kg on the basis of 1 kg of bread flour for a
leavened dough and 750 g of flour for a shortcrust pastry.
2.3 D
ISASSEMBLY
Disconnect the mixer after use.
Press the button (b6) at the rear of the base support to release the articulated arm (b1) and tip it in the
raised position using the mixer handle (fig. 14).
Remove the bowl. Release the whisks or mixers (fig. 15).
To remove the mixer, press the button (b5) and release it (fig. 16).
15
EN