Sears Craftsman 917.28972 Manual Del Usuario página 23

primera vez o
del motor, se
ue extra para
._tanque hasta
rueda libre
tda.
sici6n de
i freno y ponga
sorio a la
_=ngaged.
de la aceler-
gulaci6n.
s instrucciones
ima frio y
y gire la Ilave
anillas del reloj
rt, y suelte la
ue el motor.
_dor continu-
_=gundospot
a despu_s de
:ontrol de la
"&pido, espere
de nuevo.
_r,mueva el
posici6n de
NUBVO.
tPLADO (50 °
lueva el control
n de r&pido.
ahora pueden
cepta esta car-
para permitirle
utilizando el
) arriba.
3 (50 ° Y
_antenga et
posici6n
el motor se
mal. Una vez
I, mueva inme-
_eleraci6n a la
ento del motor
s segundos a
'ria es la tem-
_=ntarniento).
:{ANSMISION
TO iNSTALL MOWER
Be sure tractor is on level surface and
engage parking brake.
1. Lower attachment lift lever to it's lowest
position.
CAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it
slowly and engage in lowest position.
2. Turn steering wheel to the left as far as
it will go and position mower on right
side of tractor with deflector shield to
the right.
"X
NOTE: Be sure mower side suspension
arms (A) are pointing forward before slid-
ing mower under tractor,
3. Slide mower under tractor until it is
centered under tractor.
4. FIRST INSTALL ANTI-SWAY BAR (S).
From right side of mower, insert ant-
sway bar into hole in transmission
bracket (T).
Pivot bar towards you and insert
other end of bar into hole in rear
mower bracket (D). Move mower as
needed to insert bar,
Secure with washer and retainer
spring as shown.
5. ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor
chassis and secure with washer and
retainer spring.
6. Repeat on opposite side of tractor.
7. ATTACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position
slot in link assembly over pin on rear
mower bracket (D) and secure with
washer and retainer spring.
8. Repeat on opposite side of tractor.
_ntiempo frio,
a como las
situado en
lento y deje
;i6n de oper-
_= catiente
Je ser echo du-
_=ntodel motor.
23