Victron energy Quattro 12/3000/120 Manual De Usuario página 26

Ocultar thumbs Ver también para Quattro 12/3000/120:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Step 2: Exem plary setting for parallel mode
In this example, the master is configured according to factory settings.
The slaves do not require setting!
Master
DS-8 Ch. v oltage(GEL 14,4V)
DS-7 Ch. v oltage(GEL 14,4V)
DS-6 Absorption time (8 h)
DS-5 Adaptiv e charging (on)
DS-4 Dy n. current limit (of f )
DS-3 UPS f unction (on)
DS-2 Voltage (230V)
DS-1 Frequency (50Hz)
To store the settings after the required values have been set: press the 'Dow n' button of the master for 2 seconds (lower button
to the right of the DIP sw itches). The temperature and low-battery LEDs w ill flash to indicate acceptance of the settings.
You can then leave the DIP sw itches in the selected positions, so that the 'other settings' can alw ays be recovered.
To start the system: first, turn all devices off. The system w ill start up as soon as all devices have been turned on.
Step 2: Exem plary setting for 3-phase mode
In this example the leader is configured according to factory settings.
Leader (L1)
DS-8 Ch. Volt. GEL 14,4V
DS-7 Ch. Volt. GEL 14,4V
on
DS-6 Absorption time (8 h)
on
DS-5 Adaptiv e ch. (on)
on
DS-4 Dy n. current limit (of f )
DS-3 UPS f unction (on)
on
DS-2 Voltage (230V)
on
DS-1 Frequency (50Hz)
on
To store the settings after the required values have been set: press the 'Dow n' button of the leader for 2 seconds (lower button
to the right of the DIP sw itches). The temperature and low-battery LEDs w ill flash to indicate acceptance of the settings.
The DIP sw itches can be left in the selected positions, so that the 'other settings' can alw ays be recovered.
To start the system: first, turn all devices off. The system w ill start up as soon as all devices have been turned on.
6. MAINTENANCE
The Quattro does not require specific maintenance. It w ill suffice to check all connections once a year. Avoid moisture and
oil/soot/vapours, and keep the device clean.
22
Slave 1
of f
DS-8 na
on
DS-7 na
on
DS-6 na
on
DS-5 na
of f
DS-4 na
on
DS-3 na
on
DS-2 na
on
DS-1 na
Follower (L2)
of f
DS-8 na
DS-7 na
DS-6 na
DS-5 na
of f
DS-4 D. c. l. (of f )
DS-3 UPS f . (on)
on
DS-2 V (230V)
on
DS-1 na
Slave 2
DS-8 na
DS-7 na
DS-6 na
DS-5 na
DS-4 na
DS-3 na
DS-2 na
DS-1 na
Follower (L3)
DS-8 na
DS-7 na
DS-6 na
DS-5 na
of f
DS-4 D. c. l. (of f )
DS-3 UPS f . (on)
on
DS-2 V (230V)
on
DS-1 na
of f
Tabla de contenido
loading

Este manual también es adecuado para:

Quattro 24/3000/70Quattro 48/3000/35

Tabla de contenido