Geutebruck GeViScope-HS/R Manual De Operación página 45

Go to the BOOT menu.
TIP: Use the arrow keys to move about within the BIOS setup.
Switch the setting marked in BLUE to ENABLE.
TIP: Use the arrow keys to move about. In order to change something, press ENTER and, with the
arrow keys, select ENABLE. Press ENTER again to confirm.
Open the DVD-ROM drive. Place the recovery DVD in it.
Go to the menu. Select the entry
EXIT
TIP: During the BIOS setup, no language-specific keyboard is loaded. The English keyboard layout is used.
On a German QWERTZ keyboard, you need to press 'Z' for 'Y'. The N is the same for both keyboards.
The machine reboots.
Now the machine starts the recovery process. The start screen offers two buttons: CONTINUE and
CANCEL. CANCEL ends the recovery process immediately and the command line is called up. With
CONTINUE, you enter the recovery process.
Select CONTINUE to start the process and to rest the GeViScope to the same condition as on delivery.
After conclusion of the installation the computer reboots. In so-doing, it is returned to its state on
delivery.
After finishing the recovery, the BIOS settings have to be reset for safety reasons:
Switch on the machine.
When the start screen appears, press F2. The boot menu appears.
Changes. Confirm with 'Y'.
Exit Saving
19