Geutebruck GeViScope-HS/R Manual De Operación página 42

A recovery DVD is provided with all equipment (GeViScope, GeViStation, GSCViewstation). This allows
for the recovery of the software installed on the equipment on delivery as well as the original settings.
Please note that recovery process should only be carried out by qualified personnel, as all data on the
C: Drive will be overwritten!
Should the machine require resetting to its state on delivery, e.g. after a system crash, please proceed as
follows:
Switch on the machine.
When the start screen appears, press F2. The boot menu appears.
Good to know...
On machines with a BIOS password, you will be asked to enter it before the start of the BIOS setup
(after pressing F2):
Go to the BOOT menu.
TIP: Use the arrow keys to move about within the BIOS setup.
Under Priority, set the top entry to
Boot Device
TIP: Use the arrow keys to move about. In order to change something, press ENTER and, with the
arrow keys, select ENABLE. Press ENTER again to confirm.
Open the DVD-ROM drive. Place the recovery DVD in it.
Go to the menu. Select the entry
EXIT
TIP: During the BIOS setup, no language-specific keyboard is loaded. The English keyboard layout is
used.
16
<CD/DVD-ROM
Changes. Confirm with 'Y'.
Exit Saving
Drive>.