Electronic Clock Control Pads and Lights
HO UR
CLEAN
M INUTE
START
HOUR
• Use when setting hours for timer and clock.
MINUTE
• Use when setting minutes for timer and clock.
CLOCK
• Use to set time of day.
TIMER
• Use to set timer.
CLEAN START
• Use to begin self-cleaning.
CLEAN CANCEL
• Use to stop self-cleaning.
Self-clean indicator light
• Located between CLEAN START pad and
CLEAN CANCEL pad. Glows when oven is
self-cleaning.
Oven indicator light
• Glows when oven cavity is warming. Located below
clock.
CLO CK
CLEAN
TIM ER
CANCEL
Setting Electronic Clock
1. Press CLOCK pad.
2. Press MINUTE pad until correct minutes display.
3. Press HOUR pad until correct time displays.
• Clock saves time of day after time is entered.
Setting Electronic Timer
Electronic timer does not control bake, broil, or self-clean
function.
1. Press TIMER pad.
• 59 minutes displays.
• Set timer up to 1 hour 59 minutes.
2. Press MINUTE or HOUR pad to set time.
• If desired time is less than 1 hour, press MINUTE
pad until desired time displays.
• If desired time is more than 1 hour, press HOUR
pad and then press MINUTE pad until desired time
displays.
• Timer begins counting down automatically after
time is entered.
3. After time elapses, press CLOCK pad to cancel
signal and return to time of day.
Oven Light
• Used to light inside of oven.
• On some models, light turns on when oven door is
opened.
• On all models, switch located next to clock, turns
oven light on and off without opening door.
11