Choosing A Vehicle Seating Location; Determining Best Installation Method; Base Installation; Carrier Installation Without Base - UPPAbaby MESA Manual Del Usuario

CHOOSING A VEHICLE SEATING LOCATION

PLEASE READ THE FOLLOWING INFORMATION
BEFORE INSTALLING THIS CHILD RESTRAINT!
Always park on a level surface when installing a
child restraint.
The safest seating position is one that works
best for your specific car seat, family and vehicle.
When determining whether the MESA Rear-Facing
Car Seat can be used with lower anchors in the
rear center seating position, it is critical that you
refer to your vehicle owner' s instruction book. If
the MESA does not install best in the rear center
seating location, it is recommended to move to
one of the outboard seating positions.
VEHICLE
SEAT BELT
VEHICLE
SEAT BELT
RETRACTOR
14 UPPAbaby MESA Instruction Book
Before installing this child restraint
you must determine the method
of installation and the best vehicle
seating position for that method.
This child restraint can be installed
either using LATCH or the
Vehicle Seat Belt.
LOWER
ANCHORS

DETERMINING BEST INSTALLATION METHOD

At this point take out your VEHICLE OWNER'S INSTRUCTION BOOK.
You will need this to look up different features in your vehicle that might
affect the installation.
WARNING!
NEVER place a rear-facing only child restraint in front
of an active airbag.

BASE INSTALLATION

Lower Anchor Lap/Shoulder Belt
Installation (pg. 19) Installation (pg. 22)

CARRIER INSTALLATION WITHOUT BASE

Lap/Shoulder Belt Lap Belt Only
Standard Routing Method
Routing Method
(pg. 26)
UPPAbaby MESA Instruction Book
Lap Belt Only
Installation (pg. 22)
1
NOTE: The carry
handle must be locked
(pg. 26) in any (3) positions
when in use (p. 29).
2
3
15