Pinch Test; Attaching Carrier To Base; Releasing Carrier From Base - UPPAbaby MESA Manual Del Usuario

SECURING YOUR CHILD
NOTE: For smaller babies, it is recommended to remove the harness pads
for a more secure fit.
34 UPPAbaby MESA Instruction Book
4
STEP 4: Pull up on the harness to
remove excess slack around the
child' s legs.
STEP 5: Pull the harness adjuster
strap to snugly adjust the harness
straps around your child.
STEP 6: Close retainer clip and
position at armpit level. Make sure
the shoulder pads don't interfere
6
with positioning the chest clip.

PINCH TEST

HARNESS SHOULD BE SNUG.
Pinch harness webbing at child's
shoulders. If you can pinch web-
bing, the harness is too loose
and should be tightened.
5
NOTE: Handle can be in any of the
three (3) locked positions for use in
the vehicle.
STEP 1: Pull and hold carrier release
button on back of the carrier.
STEP 2: Lift carrier off base.

ATTACHING CARRIER TO BASE

STEP 1: Place carrier on base
until a click is heard
STEP 2: Check for a secure
connection by pulling up on
carry handle

RELEASING CARRIER FROM BASE

1
UPPAbaby MESA Instruction Book
.
.
1
2
3
2
35