exonda S32 Manual De Instrucciones página 42

7 General tips and advice
CAUTION
blue
7 General tips and advice
Information on how to operate the Infrared heater, models S32/S33, using the
keypad can be found in chapters "8 Operating principles, model S32" and "9
Operating principles, model S33".
7.1 Side heaters
When giving treatments, the side heaters must be folded out.
7.2 Temperature sensor/Client position
For an optimal treatment, the client's head must be positioned exactly in the
middle of the Infrared heater, models S32/S33.
Caution
The appliance must be placed around the client's head in exactly the position
shown (equidistant on all sides).
For guidance: middle of client's ear = middle of side heater
During the perm treatment, the temperature sensor permanently monitors the
temperature at the client's head and automatically offsets deviations from the
optimal temperature.
If the appliance is positioned incorrectly, the "CP" (Check Position) error message
will appear in the "Time display" field
confirm using the corresponding illuminated Start button:

Model S32
"PERM"

"COLOR"

Model S33
"CARE + PERM"

"COLOR"

"DRY"

"HIGHLIGHT"
7.3 Client button for reducing the temperature
Your client may reduce the temperature herself/himself at any time by
approximately 4° C degrees using the Client button
red
client's field of vision and the temperature symbol light will illuminate.
Pressing the button again resets the standard temperature. The red light next to
the Client button will illuminate and the temperature symbol light will go off.
7.4 Cancelling the treatment in progress
Treatments can be cancelled at any time by pressing once on
the "CLEAR" button
7.5 Memory function
The development time already elapsed will be stored automatically.
. Re-position the appliance and then
.
42
GB
D
D
. The blue light in the