The dishwasher's drying system is provided with a device that allows air to circulate inside
the dishwasher to prevent residual steam recondensing on the dishes as water droplets.
Once the washing programme has ended this device operates intermittently for other
20 minutes, as long as the dishwasher is switched on.
If the On/Off button is pressed or the door is opened during these 20 minutes, the device
will be automatically cancelled.
1. Open the dishwasher door.
– The messages PROGRAMME END alternated with PLEASE SWITCH OFF are dis-
played.
2. Press the On/Off button.
– Leave the door ajar and wait a few minutes before removing the dishes; in this way
they will be cooler and the drying will be improved
Unloading the dishwasher
• Hot dishes are sensitive to knocks.
The dishes should therefore be allowed to cool down before removing from the appliance.
• Empty the lower basket first and then the upper one; this will avoid water dripping from
the upper basket onto the dishes in the lower one.
• Water may appear on the sides and the door of the dishwasher as the stainless steel will
eventually become cooler than the dishes.
CAUTION!
When the washing programme has finished, it is recommended that the dishwasher is
unplugged and the water tap turned off.
Care and cleaning
Cleaning the filters
The filters must be checked and cleaned from time to time. Dirty filters will degrade the
washing result.
A displayed message will periodically appear to remind you to check and if necessary clean
the filters.
WARNING!
Before cleaning the filters ensure that the machine is switched off.
1. Open the door, remove the lower basket.
Unloading the dishwasher
23