Installing Batteries - HoMedics BPW-060 Manual De Usario

INSTALLING BATTERIES

1. The battery cover is
located along the
bottom side of the
monitor. Remove battery
cover by pressing down
and pulling away from
the monitor.
2. Install batteries accord-
ing to the polarity
indications inside the
compartment (as shown
in figure 2). Battery
Type: 2 Alkaline LR03
(AAA) size
3. Place in the other
battery, according to
the polarity indications
inside the compartment
(as shown in figure 3).
4. Replace the cover
by inserting it back
into place.
1.
2.
3.
4.
13
Replace the batteries if:
1. The weak battery symbol appears on
the display.
2. Nothing appears on the display when the
power is switched on.
As the supplied batteries are for test only,
they may be discharged earlier than batteries
you buy in stores. Replace all batteries at
one time (as simultaneous set). Use only
1.5V AAA alkaline batteries. Remove batteries
when unit is not in use for extended periods
of time. Date and time will need to be
reset if batteries are removed or replaced.
Clean contacts on battery and in battery
compartment with a soft dry cloth each time
you install batteries.
Note: Batteries are hazardous waste.
Do not dispose of them together
with the household garbage.
14