Sima SPIRAL-26 Manual De Instrucciones Original página 25

▼ Do not allow to use the spare parts and apparatus other than the genuine ones
manufactured by SIMA.
▼ Do not try to make bending by using the bent, distorted and cracked apparatus, and/or the
sleeves having the inner diameter enlarged.
▼ Do not try to make bending material in improper forms.(Figures 3).
▼ Do not use pressurised air to clean the machine.
▼ In case of need to open the lid of the power panel, ensure that main switch is to be off.
▼ Do not bend the material in multiple form, put one over another.(Figures 2).
▼ Do not allow the machine to be operated with the retainer dismantled.(Figures 3).
5. WARRANTY
The producer will only accept the warranty and responsibility subject to the following terms and
conditions:
▼ Observe all protective precautions.
▼ Observe the warning signs.
▼ Do not operate the machine without grounded power.
▼ Do not replace failure parts and apparatus other than the genuine ones manufactured by
SIMA.
▼ Observe the instructions specified in the safety guidelines.
▼ Observe the guidelines for safety, and efficient use.
▼ Observe the instructions for installation.
▼ Observe the conditions for loading, transportation, and unloading of the machine.
▼ Operate the machine by qualified operators.
▼ Observe the measurements, dimensions and the quality of material specified in the nameplate .
▼ Use always the machine in conformance with its production purposes.
▼ The power connection is to be made by a qualified electrician.
▼ Do not allow the machine to be operated when any of its part is disassembled.
▼ Do not change the motor.
▼ Observe the instructions for proper service and maintenance.
▼ Follow always the instructions for proper bending forms (Figures 4, 5 and 6).
6. PROTECTIVE PRECAUTIONS
6.1 Protective Cloths
 Protective helmets
 Goggles
 Boots with steel heads.
 Gloves
Use the above protective material when you work on the machine. In case of not use these
protective materials note that there is always a risk of injury such as hand-cut and/or hand-
caught.
6.2. Working Garments
Note that the following are the things and garments not convenient to wear against the risk of
injury and caught during working with the machine: long hairs, dresses with long arms, identity
disks or jewellery, long working aprons etc.
7