Display: Setting The Grid Standard And Parameters - Bosch BPT-C 200 Instrucciones De Servicio

68 | Commissioning
BPT-C 200, 300, 350 | Operating manual
 Setting the correct time is essential for showing the correct data in the
display.
If the device is connected to the Internet, the device synchronises the

time and date automatically with the time server.
If you wish to set the time and date manually:
4. Disable the Synchronise time setting with time server automatically
function
5. Change the time and date settings: Touch the
6. Touch the Apply button
The display restarts. This may take a few minutes.
■
The time and date are set.
6.2.3

Display: Setting the grid standard and parameters

During commissioning, you must set the applicable grid standard (grid
connection directive) of the photovoltaic system in the display of the
central inverter. The manufacturer has defined country-specific parameter
sets in line with the grid connection directive. The country-specific
parameter sets contain the upper and lower thresholds of the grid voltage
and the grid frequency.
Setting the country of use and the grid standard
▶
Procedure
1. Basic menu: Touch the Settings button
The Settings submenu appears
2. Touch the Grid standard button
The Country setting submenu appears
3. Select the location and the applicable grid standard
You can adapt the grid characteristics according to your project in the
Parameters submenu.
Please note the following here:
 Changes to the grid characteristics are only permitted in consultation
with the relevant energy supply company (ESC).
If you want to change the parameters after commissioning, please

contact the manufacturer. The manufacturer will provide you with a
password that is specific to the device and the date. They will require
the date on which you wish to change the parameters to do this. They
will also need the serial number of the display and the device (see the
Information submenu in the display).
4. Touch the Apply button
■
The location and applicable grid standard are set.
Refer to the help pages in the display for details.
Changing grid characteristics (optional)
▶
Procedure
1. Basic menu: Touch the Settings button
The Settings submenu appears
2. Touch the Parameters button
English
and buttons
Bosch Power Tec GmbH