Indications For Final User; Maintenance Operations - JIMTEN T-604 CC Manual De Instrucciones Y Mantenimiento

5.3. STARTING OF APPLIANCE.
To start the unit:
- Check that the lavatory has no foreign objects.
- Open the cistern filling stopcock. The grinding process needs at least 6 litres to be completed
properly.
- Check the connection to the electrical current.
- Operate the cistern several times by putting some pieces of toilet paper between each discharge to
check the adequate operating of the evacuation process. After the discharge, there must be no pieces
of toilet paper left within the lavatory bowl
6. INSTRUCTIONS FOR FINAL USERS.
Once installed and connected to the electrical power supply, the CICLON FIT does not require special
maintenance. The waster disposer automatically goes into action every time it receives a water supply
from the lavatory or from the sanitary appliance connected to it, the waste disposer stops when the
pump has finished the evacuation. For a good waste disposer operating, it is recommended to
discharge only sewage, defecations and toilet paper.
Warning notices:
- Do not throw foreign objects such as: sanitary towels, tampons, condoms, cotton, cotton buds, scou-
ring pads, sponges, hairs, sink drains, food waste, plastic bags, nappies, paper towels, etc, since
they may damage and block the waste disposer.
- Do not throw corrosive liquids such as: acids, solvents, oil, painting, stripping, as they can deform
and affect the correct working of the unit.
- In this case, the warranty does not cover those damages.
- Please, do not place inside the lavatory cistern dosage systems for disinfecting or cleaning the lava-
tory, since they could damage the discharge and filling mechanism materials with a result of esca-
pes, by starting continuously the system.
- Along with these documents, it is provided an adhesive label to be placed on a perceptible place (we
recommend to place it inside the lavatory lid) as a warning sign to avoid foreign wastes.
- Please, do not use the lavatory nor any of the sanitary appliances connected to the waste disposer
when, under any circumstances, there is a power cut.
- Regarding installations of isolated use or during long non-use periods, it is
recommended to close the stopcock feeding the cistern and, then, discharge
it by emptying it. Thus, any escape risk can be avoided.
- In areas with a frost risk due to low temperatures, it is recommended to
protect pipes with thermal insulators, as well as to prepare the whole system
(cistern, waste disposer and evacuation pipes).
- You may prevent freezing by following these steps:
- Close the stopcock feeding the cistern and discharge it.
- Fill in the cistern with antifreeze solution suitable for plumbing.
- Discharge the cistern again. The antifreeze solution will go through the installation and will fill the
evacuation pipe.
- This warranty does not cover the damages caused in the waste disposer due to freezing.

7. MAINTENANCE OPERATIONS.

Jimten waste disposer has been designed to fulfil high reliability and years of working, hereby please
find detailed the most common maintenance operations, as well as a quick troubleshooting guide for
problems you may easily solve.
T-604 CC WASTE DISPOSER
INSTRUCTIONS AND MAINTENANCE GUIDE - 25