General Power Tool Safety Warnings - Makita DFT022F Manual De Instrucciones

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Switch trigger
5 Reversing switch lever
6 Front lamp
7 LED indicator
SPECIFICATIONS
Model
Fastening torque
No load speed (min
Dimensions
Net weight
Rated voltage
Battery cartridge
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4
Explanation of general view
8 Adjusting grip
9 Ring
10 Adjusting ring
11 Scale
12 Hole for adjusting grip
13 Yellow line
14 Compression spring
DFT022F
Hard joint 0.5 – 2 N·m
Soft joint 0.5 – 2 N·m
–1
)
BL1415/BL1415N/BL1415NA/BL1430/BL1430A/BL1430B/
ENE033-1
GEA010-1
GEB050-2
DFT044F
1 – 4 N·m
1 – 4 N·m
700 950
200 x 74 x 250 mm (with Battery Cartridge BL1430)
200 x 74 x 235 mm (with Battery Cartridge BL1415)
1.5 kg (with Battery Cartridge BL1430)
1.4 kg (with Battery Cartridge BL1415)
D.C.14.4 V
BL1440/BL1450/BL1460A/BL1460B
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch
immediately after operation; they may be
extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
15 Bit
16 Sleeve
17 Limit mark
18 Brush holder cap
19 Screwdriver
DFT084F DFT126F
3 – 8 N·m 5 – 12 N·m
3 – 8 N·m 5 – 12 N·m
780
the bit or the
battery cartridge,
410
workpiece
ENC007-11
read all